Building Scanner - Scan to Network Location

MIS Department Policy & Procedure 

How to Reconnect the Scan to Network Location

1. Press the "File destination" button. 

2. Press the path up (“..”) button until it disappears meaning you reached the list’s topmost level which is the list of accessible drives. 

3. Navigate the list until you see your network location i.e. the Label you entered in step 8 under "to add a network connection" above. 

4. Select the network location.

5. Once connected, you can navigate to a folder under the network location to select it as the destination. 

6. Press OK when you have highlighted the destination folder you want to use.

7. The destination folder should be called "Building" on the list of destinations.