Tokay software reinstall (Building)

Created by Chris Sandu, Modified on Wed, 19 Feb, 2025 at 4:04 PM by Chris Sandu

MIS Department Policy & Procedure

Document Name:	Tokay software reinstall (Building)	Document Type:
Written by:		Date/Revision Date:

If the Tokay Cross Connection software needs to be reinstalled on a new PC do the following.

Note: This is a single user license and can only be installed on one PC at a time.

Tech support 800-865-2965

admin user=krajewsk schnog

1. Install from the CD to the default location on C:.

2. Delete the DATA directory from the location on C: where it was just installed.

3. Run the software. It will recognize that the data directory is missing and will ask you where it is.

4. Point it to G:\APPDATA\TOKAY\BFP95\DATA.

5. Run the software again and it should start using the correct data on the network.