Importing an Export Setup File

Created by Chris Sandu, Modified on Thu, 13 Feb, 2025 at 4:06 PM by Chris Sandu

MIS Department Policy & Procedure

Document Name:	Importing an Export Setup File	Document Type:	Procedure
Written by:		Date/Revision Date:	mm/dd/yyyy

You can IMPORT an EXPORT that was created in the GENERIC data export. You need to know which file the Export's were created in however i.e. (EQPARCEL.DAT or EQSALE.DAT ect.)

If the EXPORT was created from the EQPARCEL.DAT file you will go into EXPORT and then GENERIC DATA EXPORTS/EQPARCEL.DAT file.
Once in the EXPORT screen toggle on the IMPORT/EXPORT button.
Next select IMPORT option.... set the LOOK IN to the A drive or wherever the EXEXPORT.DAT file is
then select the EXPORT file to IMPORT and click the button to move it over to the left side of the screen and click OK.